Wooden Dog-necklace Hook
49
732
0
Design Files
  • Wooden Dog-necklace Hook.xcs
    • Contents
    Basic Information
    Instruction
    Design Files
    Preview
    Preview
    Basic Information is loading...
    Step 1
    Preview
    Preview
    Preview
    Preview
    Setting 1
    Process Method
    Blade Cut
    Power(%) or Cut Pressure(g)
    74
    Speed(mm/s)
    80
    Pass
    3
    Setting 2
    Process Method
    Blade Cut
    Power(%) or Cut Pressure(g)
    75
    Speed(mm/s)
    80
    Pass
    1
    Setting 3
    Process Method
    Laser Cut
    Process Material
    3mm Basswood Plywood
    Power(%) or Cut Pressure(g)
    100
    Speed(mm/s)
    4
    Pass
    2

    STEP1.Import designing documents and verify the size,processing position and processing mode. Put basswood plywood， walnut plywood，PVC sheets and PVC sticker films in the laser device one by one and fix their space processing area with adhesive tape and other materials to achieve good results. Then，cut them by laser or blade.

    Attention:The documents of pictures are designed by 3mm basswood plywood，3mm walnut plywood，PVC transparent sheets and PVC sticker films . If the types and thickness of materials you choose are different from that, please adjust the laser processing parameters according to the actual material.

     

     

     

    Step 2
    Preview
    Preview

    STEP2.Glue and assemble.Find the relevant part and glue them according to the picture, using glue for assistance. Glue the hook according to the picture, using glue for assistance.

     

    Design Files
    Wooden Dog-necklace Hook.xcs
    animal
    wood
    Do you like this how-to?
    Remixes (1)