SVG Personalized Mom And Kid Hands Heart Stand Decor _15032024_Khanh04.svg
Details
Comments
Remixes
Contents
Introduction
Basic Information
Instruction
Step1: Load and adjust the project in your software
Step2: Cut out the that back ground
Step3: Cut out the 2nd layer
Step4: cut out the stand
Design Files
2 layered twin heart mothers day gift with stand
Preview
Preview
Step 1: Load and adjust the project in your software
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
95
Pass
1
Speed(mm/s)
15
Depending on how many childrens hands you need to use, you can adjust to which one you need also you can choose what is said on each heart on the file
Step 2: Cut out the that back ground
Preview
Preview
Setting 1
Process Method
Vector Laser Engrave
Process Material
Birch Plywood
Power(%) or Cut Pressure(g)
50
Pass
1
Speed(mm/s)
225
Lines per cm
140
I chose which back ground I wanted on the hearts. and moved them over to the hearts. I set the out line to cut and the graphics to engrave. Then chose engrave settings for my machine machine. for this one I used 50p,225s, 140lps.
Step 3: Cut out the 2nd layer
Preview
Preview
I then chose to hide the back ground and moved it out of the work area. I then highlighted the 2nd layer and choe to it to cut and adjusted my settings to cut. and chose the output to see the file. ran project.
Step 4: cut out the stand
Preview
Preview
Preview
Preview
highlighted the file and clicked to hide the cut file and moved it off the work area and then moved the base file to the work area, and chose it to output. After this file ran, I painted the 2nd layer and the bottom part of the stand black you can choose your own color.. I then glued the 2nd layer to the first layer and then mounted it into the base. The project is now complete.
Design Files
Personalized Mom hearts.xcs
SVG Personalized Mom And Kid Hands Heart Stand Decor _15032024_Khanh04.svg
30creatorschallenge
Do you like this how-to?
License
Standard Digital File License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or laser engraved versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object), and hosting these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, or collect fees.
Remixes (0)
Remixing is disallowed by project's license policy.
Depending on how many childrens hands you need to use, you can adjust to which one you need also you can choose what is said on each heart on the file
I chose which back ground I wanted on the hearts. and moved them over to the hearts. I set the out line to cut and the graphics to engrave. Then chose engrave settings for my machine machine. for this one I used 50p,225s, 140lps.
I then chose to hide the back ground and moved it out of the work area. I then highlighted the 2nd layer and choe to it to cut and adjusted my settings to cut. and chose the output to see the file. ran project.
highlighted the file and clicked to hide the cut file and moved it off the work area and then moved the base file to the work area, and chose it to output. After this file ran, I painted the 2nd layer and the bottom part of the stand black you can choose your own color.. I then glued the 2nd layer to the first layer and then mounted it into the base. The project is now complete.