Step4: Cut the side and center braces for the stand
Step5: Assemble the Stand
Design Files
Made this 9 section coaster stand to display coasters for sale at the markets.
Preview
Preview
Preview
Preview
Preview
Preview
Step 1: Open project
Preview
Preview
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
5mm Pine Plywood
Power(%) or Cut Pressure(g)
95
Pass
2
Speed(mm/s)
15
Other Parameters
My engrave setting are 60P, 250sp,140lps
In the file it tells you the cut lines are red and the engrave is Black. Make sure you choose the cut settings for the Red and the engrave settings for the Black. Make sure you choose to ignore all the project except the section you are trying to cut or engrave.
Step 2: Cut the braces for the stand
Preview
Preview
Setting 1
Process Method
Laser Cut
Process Material
5mm Pine Plywood
Power(%) or Cut Pressure(g)
95
Pass
2
Speed(mm/s)
15
After the top of the coaster stand is cut and engraved, ignore the top portions in the output at the top right. Then move the braces on the work area and select it not to ignore. There is only one brace on the file, you need 5 of these, so I copy and pasted the other 4.
Step 3: Cut the selves for stand
Preview
Preview
Preview
Preview
Once the braces are cut move those out of the work space and move the shelf section to the work are and remember to ignore the braces and not ignore the shelf. You need to make 3 of these
Step 4: Cut the side and center braces for the stand
Preview
Preview
Once the shelves are completed choose to ignore the shelves and move them from the work area and move the braces for the sides and center to the work area. You will need 4 of these so I copied one and flipped it and put them together to utilize the wood better to have less scrap.
Step 5: Assemble the Stand
Preview
Preview
As shown in the picture start with the side and center braces with the front bottom brace. Then add the center cross brace in the center, Then add the bottom shelve then and your next cross brace. Continue this until you get to the top then add the top section of the display. Then the project is complete. The only thing I would recommend would be to clean the burned edges or it will smudge on the other peices during assembly. Enjoy a great way to display your coasters.
Design Files
5mmcoasterstand.xcs
30creatorschallenge
Do you like this how-to?
License
Standard Digital File License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital file or laser engraved versions of this object, nor any other derivative work of this object in its digital or physical format (including remixes of this object), and hosting these files on other digital platforms, web stores or cloud repositories. The objects may not be used in any way whatsoever in which you charge money, or collect fees.
Remixes (0)
Remixing is disallowed by project's license policy.
In the file it tells you the cut lines are red and the engrave is Black. Make sure you choose the cut settings for the Red and the engrave settings for the Black. Make sure you choose to ignore all the project except the section you are trying to cut or engrave.
After the top of the coaster stand is cut and engraved, ignore the top portions in the output at the top right. Then move the braces on the work area and select it not to ignore. There is only one brace on the file, you need 5 of these, so I copy and pasted the other 4.
Once the braces are cut move those out of the work space and move the shelf section to the work are and remember to ignore the braces and not ignore the shelf. You need to make 3 of these
Once the shelves are completed choose to ignore the shelves and move them from the work area and move the braces for the sides and center to the work area. You will need 4 of these so I copied one and flipped it and put them together to utilize the wood better to have less scrap.
As shown in the picture start with the side and center braces with the front bottom brace. Then add the center cross brace in the center, Then add the bottom shelve then and your next cross brace. Continue this until you get to the top then add the top section of the display. Then the project is complete. The only thing I would recommend would be to clean the burned edges or it will smudge on the other peices during assembly. Enjoy a great way to display your coasters.