Add all images to XCS and add the 3mm plywood to M1.

Select love is love file and select output.

And all others to ignore.

remove all pieces of cut wood and add a new sheet.

Select the circle image and change to the output option.

Select love is love image and change to ignore

remove all wood parts.

stick the vinyl to the mat and put it to m1.

select the first one and change the setting to output

and select all another images change to ignore

remove the finished one and add the all other color vinyls by each cut with same settings.

Clean all laser cut edges by paper napkins and rubbing alcohol.

spray lacquer to love is one sheet.

and let it dry and spray again for the second coat.

Cut all pieces of vinyl and peel off unnecessary parts using the hook tool.

Stick peeled parts to transfer tape.

And scrap with the scraper.

peel of the cover paper from the vinyl and put the vinyl into plane rounded wood.

stick all 6 parts.

you can use 1 transfer tape for all 6 colors

Cut the vinyl for the center hole with knife.

and assembly with a clock mechanism.

The good deco is done.

Thank you