HomeTemplatesDecorHome DecorWall Art
comp56
Report
[Laser cut and engrave] Window bear
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Window bear
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Window bear
Project made with xTool D1 Pro machine for Laser cut and engrave.
[Laser cut and engrave] Window bear
[Laser cut and engrave] Window bear
[Laser cut and engrave] Window bear
[Laser cut and engrave] Window bear
[Laser cut and engrave] Window bear
[Laser cut and engrave] Window bear

Window bear

Application scenario
Laser (25min)
Machine & module
xTool D1 Pro
10W
Material used
1/8"(3mm) Basswood Plywood
406

Information

      Here is a bear made from 1/4" (6.3mm) birch plywood, engraved and painted for a windows, this was made for a special person that loved bears
Comments

Remixes

xTool Supplies Used in This Template

xTool D1 Pro
xTool D1 Pro
1/8"(3mm) Basswood Plywood
1/8"(3mm) Basswood Plywood