Laser Larry
Report

Small Display Easel

Instruction
Easle - Fancy.xcs
Easle - Fancy
.xcs
Application scenario
Laser (5min)
Machine & module
xTool F1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
464
2723
Information
      I've created several white tile engravings and slate coaster engravings that deserved to be displayed properly. This easy to create easel allows these items (and others) to be displayed. Using an F1, the slide extension is needed.
    
Instruction
1
Step1: Select your easel type and size.
Preview

I've included two types of easels in a couple sizes. I prefer the “fancy” easel, as tiles and coasters fit into it better. The “small fancy” easel is the right size to display white tiles.

2
Step2: Adjust the size (height) if needed.
Preview

To make a taller or shorter easel, adjust the height of both portions of the easel. You'll also need to adjust the interlocking “cut” on each piece. Change the length of this cut to 50% of your new height. Be sure to unlock the dimensions padlock, as you want the width of this cut to remain the same. This is the thickness of your wood.

3
Step3: Cut your easel.
Preview

Cut your easel. I use the default reference settings. You may get some scorching, but I paint the easels.

4
Step4: Assemble and paint.
Preview
Preview

Once cut, slide the two pieces together and place onto the base. You can glue the pieces together, if you wish. I also make a quick paint job using spray paint.

Comments
Remixes
xTool Supplies Used in This Template
xTool F1
xTool F1
3mm Basswood Plywood
3mm Basswood Plywood