Giuls Creations
Report

Spring Flower Wreath

SpringWreath.xcs
SpringWreath
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool M1
10W
Material used
3mm Basswood Plywood
2mm Eva Foam
36
398
Information
      Handcrafted Flower Wreath Decoration with Sunflowers and Butterflies
    
Instruction
1
Step1: Cut all the pieces
Preview

Put the eva foam into the M1 or the basswood for the base.

 

BE CAREFULL: if you have the air assist use the tape to fix the eva foam to the plate.

2
Step2: Paste each Piece
Preview
Preview
Preview
7 More images

Sunflower:

  • Center use the hot glue to fold in a half the strips
  • Petals use the hot glue for the base of each petals, then paste all the petals toghether and then add the bottom
  • Then paste the center to the petals part

Roses:

  • Add the hotglue to the bottom of the strip, then roll the strip.
  • Once is pasted, gave the right shape to the petals with the hands.

Butterflies:

  • Put a little point of hot glue on the central part of the top piece then paste the piece together.
3
Step3: Choose the best position for each piece
Preview

Try if all pieces are fitting well.

 

4
Step4: Paste & Enjoy
Preview

Paste all the pasted pieces with some hot glue and ENJOY!

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood