dhartke66
Report

Intricate wooden pencil holder with cut-out patterns

Instruction
Pencilbox.xcs
Pencilbox
.xcs
Application scenario
Laser processing
Machine & module
xTool M1
10W
Compatibles · 8
Accessories
xTool M1 Exhaust Fan
xTool M1 Laser Module Fan + Screws
xTool M1 Air Assist Set
xTool Smoke Purifier Pre filter(5PCS)
Material used
3mm Birch Plywood
115
566
Information
      This is an eight sided pencil holder.  The size is approximately 4" tall and 3" in diameter.  
    
Instruction
1
Step1: Bring in files
Preview

Once the files are loaded you can then set you material and parameters and then cut. 

 

2
Step2: Finish

You can choose how you want to finish up your wood.  I chose to just seal my wood with Poly.  

Then assemble using some wood glue in the finger joints.  I do suggest putting it all together once before gluing to check for tightness. 

 

Enjoy!

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Exhaust Fan
xTool M1 Exhaust Fan
xTool M1 Laser Module Fan + Screws
xTool M1 Laser Module Fan + Screws
xTool M1 Air Assist Set
xTool M1 Air Assist Set
xTool Smoke Purifier Pre filter(5PCS)
xTool Smoke Purifier Pre filter(5PCS)
xTool M1
xTool M1
3mm Birch Plywood
3mm Birch Plywood