Report
Wooden Keychains for Dad
InstructionKeyChainDad1
.xcs
Application scenario
Laser processing (5min)
Machine & module
xTool M1
10WCompatibles · 9
Material used
3mm Basswood Plywood
99
586
Information
Wooden Keychains for Dad. Made with 3mm bassewood plywood in Xtool M1
Instruction
1
Step1: Design
Preview
Open the KeyChainDad1.xcs file in Xtool Creative and you will have the Keychain
2
Step2: Cutting Setting
Preview
The file is set for 3mm Basswood Plywood with Triangular Prism.
The cut layer is red and is set for Xtool M1 10W, you can change this option depending on the machine. You can also modify the parameters depending on the material as plywood, acrylic, leather, or any other material you have available
3
Step3: Engraving settings
Preview
Add the name you want to have in the Keychain. The font can be modified, as well as the size. Always with the same power and speed settings so that the engraving is homogeneous.
4
Step4: Place Stainless Steel Keyring
Add the 2 Stainless Steel Keyring to the two wood to finish the Keychain
Comments
Remixes
xTool Supplies Used in This Template