Report
Fun With Keys
InstructionKeys
.xcs
Show 3 more
Application scenario
Laser processing (90min)
Machine & module
xTool P2
55W
xTool D1
10WMaterial used
3mm Black MDF board
3mm White MDF Board
3mm MDF Board
Nails
Blu-Tack
Wood Glue
171
1019
Information
Watched the TV Series Locke & Key and thought it would be fun to make some keys on the P2 laser. I have come up with 21 of them and mounted them in a frame to put on a wall.
Instruction
1
Step1: Cut out the keys
Preview
If you are only doing some of the keys then you will have to organise them to suit your needs. The frame and border will of course have to change as well.
2
Step2: Cut out the backing board & Mark the nail positions
Preview
If you are doing a selection of keys then you might also design your backing along similar lines.
3
Step3: Hammer in the Nails (Tacks) for the key supports
Preview
Use the positions marked on the backing board (White Board in my case) to place the nails.
4
Step4: Glue the Border to the Frame & Mount the Keys
Preview
The Nail positions on the back board are based on the order I have positioned the 21 keys. If you change the order then you will have to modify where the nails are placed.
Comments
Remixes
xTool Supplies Used in This Template