HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
Polanco PPE
Report
Laser cut and engrave Santa Claus carrying gifts with snowy village background
Project made with xTool D1 Pro machine for Christmas.
Laser cut and engrave Santa Claus carrying gifts with snowy village background
Laser cut and engrave Santa Claus carrying gifts with snowy village background

SantaCruising

Instruction
SantaCycleBLKBusinessCard.3mmBasswoodFrame..xcs
SantaCycleBLKBusinessCard
.3mmBasswoodFrame
Application scenario
Laser processing (15min)
Machine & module
xTool D1 Pro
20W
Compatibles · 4
Accessories
xTool D1 Pro/D1 Air Assist Set
Material used
3mm Basswood Plywood
0.3mm Black Metal Business Card
4
310
Information
      Santa delivers toys on a motorcycle—ornament with 3mm Bass Wood Frame.
Instruction
1
Step1: Setup for Santa Claus Motorcycle Sled
Preview

Instructions:

You can use any AI or image of choice on a black business card. It is recommended to pin down the card using tape or honeycomb clamps.

Frame: Cut out two pieces of 3mm basswood:

One piece will be the base.

The other piece will be the frame on top.

Once complete, glue them together with the business card in the center.

Glue used: CA glue

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro/D1 Air Assist Set
xTool D1 Pro
xTool D1 Pro
3mm Basswood Plywood
3mm Basswood Plywood
0.3mm Black Metal Business Card
0.3mm Black Metal Business Card

License

CC0
This work contains AI-generated content.