Report
![[Laser cut and engrave] Forward and Reverse engraving](https://image-res.xtool.com/ali-res/community/making/9286ef8a-7949-400a-922e-1e8cb1a44c48/PXL_20231022_222038231.jpg?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Forward and Reverse engraving
Instructionmortals
.xcs
Application scenario
Laser (40min)
Machine & module
xTool S1
20WCompatibles · 9
Material used
1/8"(3mm) Basswood Plywood
3mm Basswood Plywood
230
2594
Information
This is a project that has spooky vibes with regular engraving and opposite engraving.
Instruction
1
Step1: Designing
Preview
Preview
Preview
Preview
Step 1) with this project it starts with basic shapes, most of these shapes are made within XCS software, adding to the circle are semi circles and half moons. Along with these parts text was added and the curved feature is used to display the text in a curved fashion.
2
Step2: Set Up
Preview
Preview
Step 2) In this step the middle graphic is added, with this graphic a little trick is done to make sure the text in this image is not engraved but everything around it is. This is done by highlighting everything and with the combine feature the subtract at overlap is selected. This allows all the pieces to become one solid graphic.
3
Step3
Preview
in this step the project is sent to the laser machine
Comments