I used Jo Stapleton’s 7-layer Halloween décor as a starting point of my version of her file. I enlarged it to 207.6 mm by 252.5 high and I modified the layers as follows:

·        Layer 1 - I changed to a orange acrylic, Etched the Happy Halloween in and then Painted it Black.

·        Layer 2, 3, and 4 - I used Basswood kept her setup except I cut holes in the base.

·        Layer 5 - I used Clear Iridescent acrylic picked a couple of XCS shapes from the holiday selection a ghost and a spooky house.  The ghost I engraved, and the house I Scored and centered on the bottom of the circle.  I cut holes in the base.

·        Layer 6 - I used clear acrylic and cut the shape out. I cut holes in the base.

·        Layer 7 - I used the Blue Mirror Acrylic Sheet and cut the shape out with a 5mm wide slot lining it up with the holes cut in 2 through 6 layers.

·        The hole cut in the base was 170 mm wide and 40 high. I glued layers 7 through 2 the holes in the base lined up and I fed a led strip into the holes the LEDs are placed so that the LEDs shine up and against the Acrylic and towards Layer 1.