Report
![[Laser cut and engrave] Keyhook](https://image-res.xtool.com/resource/xtool/community/attachment/xtool-community/8dd765c0-c2fa-48ba-bddd-a15b604ada47?x-oss-process=image/resize,w_1200,h_900,limit_0/interlace,1/format,webp/auto-orient,1)
Keyhook
Instructionkeyhook
.xcs
Application scenario
Laser processing (20min)
Machine & module
xTool P2
55WCompatibles · 10
Material used
1/8"(3mm) Cherry Plywood
29
435
Instruction
1
Step1: Step 1
Preview
An easy project and can be resized to suit the number of hooks needed.
To start, resize the object and add/move the hook markers (scored circles) to suit the keyhook.
2
Step2: Step 2
Preview
Personalise the key with the family name or remove if you want it unpesonalised.
3
Step3: Step 3
Process the design, use the camera to make sure the design is lined up on the aterial and check all settings are suitable for your material.
4
Step4: Step 4
Screw the hooks into the front of the key where the scored holes are placed and then adda hanging hook to the back.
Hang to the wall.
Comments
