Herb THE berT
Report

Autumn leave

Instruction
autmnleave.xcs
autmnleave
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool D1 Pro
20W
xTool M1
10W
Compatibles · 9
Accessories
xTool M1 Exhaust Fan
Material used
3mm Basswood Plywood
1354
5883
Information
      small beautiful autumn decoration element

    
Instruction
1
Step1: create in XCS
Preview
  1. on the side are the whole templates in XCS
  2. add the sheet from XCS
  3. create a shape with the path tool
  4. copy this shape several times and adapt it to the rest
  5. select all areas and choose combine
  6. select the shape and the leave and choose substract

PS: i forgot i create a circle with 3mm und place it in the stem

2
Step2: Painting
Preview

i used acrylic pencils for coloring
 

attention the sheet is a bit fragile 

3
Step3: assembling
Preview

take a cord with a length of approx. 30cm
put one end through the hole in the leaf
pull the string through to the middle
take a bead and put both ends through the bead
and push the bead to just before the leave
make a knot with both ends

Comments
Remixes
xTool Supplies Used in This Template
xTool M1 Exhaust Fan
xTool M1 Exhaust Fan
xTool D1 Pro
xTool D1 Pro
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood