HomeTemplatesDecorSeasonal & Themes DecorHolidays Decor
LaserCutano
Report
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Project made with xTool S1 machine for Halloween.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Multilayer Pumpkin

Instruction
Pumpkin.xcs
Pumpkin
.xcs
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20W
Compatibles · 9
Material used
3mm Basswood Plywood
675
3158
Information
      Enchanted 12-Layer Halloween Pumpkin 

Unveil a world of Halloween magic with this intricate, 12-layer pumpkin design. Each layer reveals a new spooky surprise, from a mischievous cat to a haunted castle. Cut from your choice of material, including wood, MDF, acrylic, paper, or cardboard, this design is perfect for creating a truly unique and enchanting Halloween centerpiece.

Key Features:
12-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Perfect for both beginners and experienced makers.

Download this design and start creating your own enchanted Halloween centerpiece!
Instruction
1
Step1: Using xTool Creative Space
Preview

Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.

 

BLACK LAYER

  1. Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
  2. Select the black layer (this layer contains the path for cutting).
  3. Set the processing type of the black layer to Cut. 
  4. Click on “EasySet panel” to open the power and speed settings for the selected layer.
  5. Set the Power (S1-20w: 100) 
  6. Set Speed (S1-20w: 5) 
  7. Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview

After cutting you have 12 layers.

You must glue all the layers of the pumpkin together.

You can paint before gluing.

3
Step3: Done
Preview

Now you can enjoy the terribly beautiful decoration during your Halloween celebration or give it to your friends.

Comments
Remixes
xTool Supplies Used in This Template
xTool S1
xTool S1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY