Laser Engraved Image on Wood

crezeel avatar
crezeel
·
266
1269
Design Files (1)
  • Horse head wood.xcs
    S1

    • Summary

    By "Clara's Trendy Designs". Image from Face Book. High quality image qualities really make the difference. High contrast, focused details on main subject with contrasting background that can be removed easily.
1. Down load image and upload to ImagR where background removed and dithered for wood. 2. Upload to XCS try different Bitmap modes for review choosing one liked the best; I usually choose Atkinson. 3. I like a little deeper cut and have found 50% power 150 mms works well for wood. 4. Following engraving rinse under water tap, dry and coat with clear finish.

    Production Info

    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Material used
    6mm 12 x 12 inch Birch
    12 x 12 inch 6mm Birch from Home Depot. The image was obtained from a photo on a Face Book post. Unfortunately I lost the site before I could copy. It was an Art piece posted and the horse was created by an artist using paper mache type strips rolled and formed and assemble together. (Quite amazing)
    Total time
    300 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    License

    CC BY-ND
    This license allows reusers to copy and distribute the material in any medium or format in unadapted form only, and only so long as attribution is given to the creator. The license allows for commercial use.

    Do you like this project?