Easter Bunny Egg Holder

Ondrashek avatar
Ondrashek
·
114
597
Design Files (1)
  • Easter Bunny Egg Holder.xcs
    S1
    • Edited 2025/02/14

    Summary

    For bending poplar plywood I used hot tap water and carefully bend it and let it dried with a clips. After that you can glue bottom part and rear part and glue "basket" to the stand. When basket is glued to the stand you can glue basket to bunny. Insert egg to the basket and glue paper straps to the stand.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    10W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool P2
    55W
    xTool S1
    20W, 40W
    xTool F1 Ultra
    20W
    xTool D1 Pro
    40W, 10W, 5W, 20W
    xTool F1
    10W
    xTool M1
    5W, 10W
    xTool M1 Ultra
    10W, 20W
    Material used
    Poplar Plywood
    4mm thickness plywood, pattex glue for wood, green paper straps
    Total time
    30 min

    Setting

    Setting 1
    Setting 2
    Setting 3

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts
    ×