Melting Vinyl Earrings
kerisvoboda
·
100
921
Design Files (2)
  • Melting-Vinyl-Earrings.xcs
    F1
  • 236.svg
    • Description
    For this piece, I used two different types of materials.  I used 3mm thick Red opaque acrylic from Glowforge and green acrylic sheet from xTool.  I am making it for a friend that I'll be visiting soon.  When cutting the thicker acrylic make sure that you always engrave first (Blue light, 30% power, 50 speed, 1 pass, 200 lines per cm, bi-directional) and then cut after (100% power, 3 speed, 2 passes).  I can't quite remember what I used for the thinner green sheet, but the settings were fairly fast, likely close to 1000 speed.  Good luck!
    Production Info
    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1
    10W
    Material used
    Transparent Acrylic
    Glowforge, red, 3mm, acrylic
    Total time
    5 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Setting
    License
    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.
    Do you like this project?