Wooden Bowl

Laser Larry avatar
Laser Larry
·
591
4055
Design Files (1)
  • Bowl Project.xcs
    F1
    • Edited 2025/02/14

    Summary

    I saw this project discussed on the F1 Official Facebook group by Ian Dorosh and gave the design a try.

I made three sizes of bowls. I made a small 4" bowl (without taping) on a F1. Then made a couple larger bowls taped to prevent scorch marks at 6" and 12" on the S1.

Pretty easy to make and cut. It does take a little patience glueing them together. The results are pretty cool.

Next time, I'll engrave a design on the base of the bowl.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool P2
    55W
    xTool S1
    10W, 20W, 40W
    xTool F1 Ultra
    20W
    xTool F1
    10W
    xTool P2S
    55W
    xTool D1
    5W, 10W, 20W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool M1 Ultra
    10W, 20W
    xTool M1
    5W, 10W
    Material used
    3mm Basswood Plywood
    The small bowl was made with 3mm. The mid-sized bowl used 2mm, and the large bowl used 4mm thick basswood.
    Total time
    30 min

    Setting

    Setting 1

    License

    CC BY
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts