Summary

🐉 About the Model:
This Dragon Castle Dice Tower is designed for laser cutting using 3 mm plywood. It assembles into a stunning 3D “dragon attacking a castle” dice roller—perfect for Dungeons & Dragons and other tabletop RPGs.

Minimum Laser Bed Size: 300 mm × 300 mm

Ensure your laser cutter’s working area is at least 300*300 mm. Smaller machines may not accommodate the largest parts.
-------------------------------------------------
📏 Model Dimensions (Assembled)
Length: 329 mm
Height: 250 mm
Width: 200 mm
-------------------------------------
📁 Included File Formats
AI (Adobe Illustrator)
DXF (Drawing Exchange Format)
SVG (Scalable Vector Graphics)
PDF (Full assembly instructions)
-----------------------------------------
⚙️ Compatibility & Requirements
Material: 3 mm plywood (or laser-safe MDF)
Minimum Laser Bed: 300*300 mm
---------------------------------------------
📐 Scaling Instructions (for other material thicknesses)
If you plan to use different material thicknesses, scale the entire design proportionally:

For 2 mm boards: 2 ÷ 3 = 0.6667 → Scale to 66.67%
For 4 mm boards: 4 ÷ 3 = 1.3333 → Scale to 133.33%
⚠️ IMPORTANT: After scaling, your laser cutter will require a correspondingly larger working area.
At 66.67%, minimum bed size becomes approximately 219 mm × 133 mm (329 × 0.6667 by 200 × 0.6667).
At 133.33%, minimum bed size becomes approximately 438 mm × 267 mm (329 × 1.3333 by 200 × 1.3333).
Please ensure your machine’s travel matches the scaled dimensions to avoid cutting errors.