Brass Chandelier

DesignFind avatar
DesignFind
·
55
502
Design Files (2)
  • 0.5mmBrassChandelier-OrdinaryNozzle-xToolAirCompressor&Dryer.xcs
    HJ003
  • 0.5mmBrassChandelier-OrdinaryNozzle-1.2MPa.xcs
    HJ003
    • Edited 2025/05/02

    Summary

    Create a stunning brass chandelier using the xTool MetalFab! This easy DIY project not only provides beautiful lighting but also serves as a decorative statement piece. Imagine the charm it will bring to your space—and you can even sell it for profit! Showcase your creativity and craftsmanship. Start your chandelier project today and light up your home!

    Production Info

    Application scenario
    Laser welding / cleaning
    Software
    xTool Creative Space
    Machine & processing module
    xTool MetalFab Laser Welder
    1200W
    Accessories
    xTool Selected Air Compressor
    xTool Selected Ary Dryer
    Material used
    1/50''×24''×24''(0.5mm×610×610) Brass* 4pcs
    Nitrogen Cylinder 、Pressure Valve 、Wire-free welding nozzle 、Masking Tape Bulb Hanging cord (diameter less than 5mm) 、Power cable or power line
    Difficulty Level
    Intermediate
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    Setting

    Setting 1 - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  Common_edge: false  Drilling_delay: 500  Drilling_delay_2: 500  Drilling_dutyCycle: 100  Drilling_dutyCycle_2: 100  Drilling_enable: false  Drilling_enable_2: false  Drilling_frequency: 3000  Drilling_frequency_2: 100  Drilling_height: 2  Drilling_height_2: 2  Drilling_power: 100  Drilling_power_2: 100  Drilling_time: 100  Drilling_time_2: 100  DutyCycle: 100  EnableBreakPoint: false  EnableFlyCut: false  EnableKerf: false  Frequency: 3000  KerfDistance: 0  Power: 100  Repeat: 1  Slow_enable: false  Slow_height: 4.5  Slow_height_enable: false  Slow_length: 5  Slow_speed: 5  Speed: 300 
    Setting 2 - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  Common_edge: false  Drilling_delay: 500  Drilling_delay_2: 500  Drilling_dutyCycle: 100  Drilling_dutyCycle_2: 100  Drilling_enable: false  Drilling_enable_2: false  Drilling_frequency: 3000  Drilling_frequency_2: 100  Drilling_height: 2  Drilling_height_2: 2  Drilling_power: 100  Drilling_power_2: 100  Drilling_time: 100  Drilling_time_2: 100  DutyCycle: 100  EnableBreakPoint: false  EnableFlyCut: false  EnableKerf: false  Frequency: 3000  KerfDistance: 0  Power: 100  Repeat: 1  Slow_enable: false  Slow_height: 4.5  Slow_height_enable: false  Slow_length: 5  Slow_speed: 5  Speed: 280 

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts