Easter Tabletop Display- P2S

nettec22 avatar
nettec22
·
4
42
Design Files (1)
  • EasterBunnyandEggDisplay.xcs
    P2S
    • Edited 2025/04/04

    Summary

    This design is a perfect project for an Easter table or shelf display. It is a multilayer design incorporating two of Easter's icons, the Easter egg and Easter Bunny.

    Production Info

    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool P2S
    55W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool D1
    5W, 10W, 20W
    xTool F1
    10W
    xTool F1 Ultra
    20W
    xTool M1 Ultra
    10W, 20W
    xTool P2
    55W
    xTool M1
    5W, 10W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool S1
    10W, 20W, 40W
    xTool P2S
    Material used
    3mm Basswood Plywood
    3mm Pink MDF board
    3mm Yellow MDF board
    Difficulty Level
    Intermediate

    Setting

    Setting 1 Process on baseplate - Vector Laser Engrave - BitmapScanMode: zMode  Density: 100  Power: 20  Repeat: 1  Speed: 400 
    Setting 2 Process on baseplate - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  CuttingDrop: false  CuttingDropValue: 1  EnableBreakPoint: false  EnableKerf: false  KerfDistance: 0  Power: 60  Repeat: 1  Speed: 27 
    Setting 3 Process on baseplate - Vector Laser Engrave - BitmapScanMode: zMode  Density: 100  Power: 30  Repeat: 1  Speed: 400 
    Setting 4 Process on baseplate - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  CuttingDrop: false  CuttingDropValue: 1  EnableBreakPoint: false  EnableKerf: false  KerfDistance: 0  Power: 80  Repeat: 1  Speed: 20 
    Setting 5 Process on baseplate - Vector Laser Engrave - BitmapScanMode: zMode  Density: 100  Power: 30  Repeat: 1  Speed: 400 
    Setting 6 Process on baseplate - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  CuttingDrop: false  CuttingDropValue: 1  EnableBreakPoint: false  EnableKerf: false  KerfDistance: 0  Power: 80  Repeat: 1  Speed: 20 

    License

    CC BY-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts
    ×