Summary

SVG and XCS file to create an adorable earring and pendant holder. Ideal for a store to present its creations. 

In the photos it is made from 3mm plywood, slightly reduced in size because I only had 30x30cm boards (height in the photo 29.5cm). I did it with my p2s but you can also do it with others laser (you have just to reduce the size for small lasers)

The article is indeed an SVG file (as well as an xcs for the XTOOL software for those who use it) for use with typical software for laser engraving and cutting. There are 2 formats for the svg, in large format and in a slightly smaller format (but larger than the photo anyway ;-))

On the file, what is red must be in cutting, and black in engraving.
For wood 3mm thick, for thicker just ungroup and change the thickness of the notch (replace the 2.90 mm with the desired thickness).

Total height of the large format: approximately 43.7 cm x 39.5 cm in width for the head part
Total height normal format: approximately 32.7 cm