LS Tri Layer Acrylic Test Grid

kacieandiangoodale avatar
kacieandiangoodale
·
39
366
Design Files (1)
  • P2_test_Grid.xcs
    P2
    • Edited 2025/02/17

    Summary

    A Test grid for an xtool p2. This is a tri layer acrylic but can be used for lots of different materials as a test grid.
Please note you can adjust the Lines Per CM and air assist for different materials.
i.e for the LS Tri Layer Acrylic I use 160lpc and am experimenting with the air settings.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool P2
    55W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool F1
    10W
    Material used
    Tri Layer Acrylic
    0.5mm Silver-black Leather
    Difficulty Level
    Beginner

    Setting

    Setting 1 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 10  Repeat: 1  Speed: 550 
    Setting 2 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 15  Repeat: 1  Speed: 550 
    Setting 3 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 20  Repeat: 1  Speed: 550 
    Setting 4 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 25  Repeat: 1  Speed: 550 
    Setting 5 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 30  Repeat: 1  Speed: 550 
    Setting 6 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 10  Repeat: 1  Speed: 450 
    Setting 7 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 15  Repeat: 1  Speed: 450 
    Setting 8 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 20  Repeat: 1  Speed: 450 
    Setting 9 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 25  Repeat: 1  Speed: 450 
    Setting 10 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 30  Repeat: 1  Speed: 450 
    Setting 11 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 10  Repeat: 1  Speed: 350 
    Setting 12 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 15  Repeat: 1  Speed: 350 
    Setting 13 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 20  Repeat: 1  Speed: 350 
    Setting 14 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 25  Repeat: 1  Speed: 350 
    Setting 15 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 30  Repeat: 1  Speed: 350 
    Setting 16 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 10  Repeat: 1  Speed: 250 
    Setting 17 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 15  Repeat: 1  Speed: 250 
    Setting 18 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 20  Repeat: 1  Speed: 250 
    Setting 19 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 25  Repeat: 1  Speed: 250 
    Setting 20 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 30  Repeat: 1  Speed: 250 
    Setting 21 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 10  Repeat: 1  Speed: 150 
    Setting 22 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 15  Repeat: 1  Speed: 150 
    Setting 23 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 20  Repeat: 1  Speed: 150 
    Setting 24 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 25  Repeat: 1  Speed: 150 
    Setting 25 Honeycomb panel - Bitmap Laser Engrave - BitmapMode: Jarvis  BitmapScanMode: zMode  Density: 140  Power: 30  Repeat: 1  Speed: 150 
    Setting 26 Honeycomb panel - Laser Score - EnableKerf: false  KerfDistance: 0  Power: 40  Repeat: 1  Speed: 250 
    Setting 27 Honeycomb panel - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  CuttingDrop: false  CuttingDropValue: 1  EnableBreakPoint: false  EnableKerf: false  KerfDistance: 0  Power: 100  Repeat: 1  Speed: 25 

    License

    CC BY
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts