Test Laser-Curing Powder Paint Fill
Richard
·
218
3658
Design Files (1)
  • M1 Parameters Test for color fill.xcs
    • Description
    I've been trying to determine the best setting to use to fill engraved wood with powder paint. The effect can be a brilliant color contrast, but I've done most of my powder paint projects by masking and using a heat gun after engraving. I've never been able to fine tune my settings enough to figure out the best options to have the laser cure the paint.

I finally got around to running these tests. Hopefully you'll be able to follow similar steps to determine the settings that work best for your machine, material, and paint.
    Production Info
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool M1
    10W
    Material used
    3mm Basswood Plywood
    Scrap Basswood plywood purchased at Amazon; bright green Pro-Tec Powder Paint
    Total time
    60 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Do you like this project?