Report
❤️ Romantic personalized puzzle ❤️
InstructionPuzzleGio
.xcs
Application scenario
Laser processing、Inkjet printing
Machine & module
xTool M1 Ultra
10WCompatibles · 8
Material used
3mm Basswood Plywood
6mm Basswood Plywood
320
1222
Information
❤️❤️❤️Take your love to the next level with our personalized puzzle! Add your picture, engrave it (or print it with the inkjet module of the M1 Ultra) and there you have a beautiful gift for your Valentine! ❤️❤️❤️
If you prefer different type of puzzle shape, here you have a free website:
https://draradech.github.io/jigsaw/index.html
Enjoy it and Happy Valentine!
Please leave a comment with your thoughts and a picture of your creations!
Instruction
1
Step1: Upload our file in XCS
Preview
2
Step2: Place your basswood
3 mm or 6 mm basswood suggested. 6 mm would allow a thicker and more resistant puzzle, but 3 mm is quicker and cheaper.
3
Step3: Select the picture
Preview
Choose the parameters to engrave or print your picture. These parameters are up to you, since they are differ a lot in different woods.
For the owners of M1Ultra, I suggest you increase a lot the saturation value of your picture, and then use 40% intensity and 1 pass.
4
Step4: Select the puzzle
Preview
There you are. Now you have to cut it and you'll have your puzzle. The parameters here are for 3 mm basswood. If you prefer 6 mm use Power 100%, speed 3 mm/s, passes 3, lower the focus 2 mm.
5
Step5: THE PUZZLE IS READY!
Preview
Go and make your partner happy!
Comments
Remixes
xTool Supplies Used in This Template