Summary
There are lots of these snowglobe ornaments available on sites like Etsy, and it seemed beneficial to be able to make my own. This was developed specifically in the XTOOL Creative Space, and was done using an XTOOL P2 cutter.
Production Info
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module

55W
Guidelines for using compatible machines

5W, 10W


10W, 20W, 40W

5W, 20W, 10W, 40W

10W, 20W

55W

10W

20W

5W, 10W, 20W
Material used

The acrylic used in this project was the 3mm that came in the demo pack. I would recommend either going with a thinner acrylic, or just doing a thin, clear plastic sheet just to cut down on size and weight.
The Basswood done in this example was the light brown 3mm, but can also be done with walnut.