3D topographic map Red River

LlamaBigMac avatar
LlamaBigMac
·
18
415
Design Files (5)
  • Hillshade.png
  • MapContours.pdf
    • View All
    Edited 2025/03/04

    Summary

    This project was initially just planned for me personally, but I included everything you should need to complete the project yourself. If doesn't make sense, comment it and I will try to help as quickly as possible.

    Production Info

    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    20W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool F1
    10W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool F1 Ultra
    20W
    xTool D1
    5W, 10W, 20W
    xTool S1
    10W, 40W
    xTool P2
    55W
    xTool M1 Ultra
    10W, 20W
    xTool P2S
    55W
    xTool M1
    5W, 10W
    Material used
    3mm Basswood Plywood
    Gorilla Glue spray adhesive
    You can use any thickness desired for this project, but I highly recommend not doing more than 3mm( 1/8" ) which is what I did. If I redid this project, I would probably do 1.5mm ( 1/16" ). I used 9 - 12" X 24" Sheets of Basswood Plywood 1/8"
    Difficulty Level
    Intermediate

    License

    CC BY-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts