Summary
I saw a guy doing a modified NWT Technique using color instead of just white and black paint. I just wanted to see if it could be done on wood. Obviously, it's not the NWT technique; it just uses the basic idea of layers of paint etched off to expose the paints at different depths. So one image is a before epoxy, and one is after. Using Xart, I came up with this image, loaded it into XCS, edited it, saved as an SVG, exported ran it through Imag-r, and used Norton white tile painted black.
Production Info
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module

10W
Material used

3mm Basswood blank square coasters from Amazon, Various paints, and two-part crystal clear epoxy.
Total time
720 min
Also compatible with other machines. Visit the Material EasySet Library for more.