Summary
Made a colorful Grinch Lantern and used an LED battery operated set of lights inside. I made this on the M1 by using a 12x12 3mm pine boards. For the grinch body i rotated til it fit completely inside the board. This took approximately 3 boards to complete it. For painting, I used painters tape and taped off the areas to paint different colors. I also made this completely stained. The finished options is completely your choice.
Production Info
Instruction
Not included
Application scenario
Laser processing
Software
xTool Creative Space
Machine & processing module
xTool M1
10W
Material used
3mm Basswood Plywood
I used 3 - 3mm plywood 12"by12" sheets. Took me an estimated 3 hours from start to completely finished.
Difficulty Level
Intermediate
Total time
180 min
Also compatible with other machines. Visit the Material EasySet Library for more.
Setting
License
This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.