Slide Extension Bottle Opener Jig

atomm-creator-avatar
gooptroop.ian
·
257
2414
Design Files (1)
  • SlideBottleOpener.xcs
    • Report

    Summary

    This Jig will take 20 bottle openers. You will need the Slide Extension
1. Start with two 3mm plywood boards 400x115mm. 
2. Note the position of the 2 blocks on the slide extension. Do your normal side extension setup.
3. Run the files I did the score for the engrave alignment first. Then I ran the cut job.
4. Glue the two boards

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool F1
    10W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool S1
    20W, 40W, 10W
    xTool P2S
    55W
    xTool F1
    10W
    xTool F1 Ultra
    20W
    xTool M1 Ultra
    20W, 10W
    xTool D1
    10W, 20W, 5W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool M1
    5W, 10W
    xTool P2
    55W
    Material used
    3mm Basswood Plywood
    3mm Plywood
    Total time
    30 min

    Setting

    Do you like this template?