Loom

mark.donnelly avatar
mark.donnelly
·
41
299
Design Files (1)
  • Weavingloom_2.xcs
    S1
    • Edited 2025/03/28

    Summary

    This file contains a simple hand weaving loom suitable for use in a beginner textile class. Canvas 1 has a small loom and canvas 2 has a large loom. All the tools to get started are included on the tool card. Chop, change and resize the needles as needed to suit your wool or weaving material. The loom is set up for quarter inch spacing/ 4EPI.

    Production Info

    Application scenario
    Other
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool P2
    55W
    xTool P2S
    55W
    xTool F1 Ultra
    20W
    xTool M1
    5W, 10W
    xTool S1
    20W, 10W
    xTool F1
    10W
    xTool M1 Ultra
    10W, 20W
    xTool D1 Pro
    40W, 5W, 20W, 10W
    Accessories
    xTool S1 40W Laser Module
    xTool S1 Honeycomb Panel
    xTool 6-inch 410 CFM Inline Duct Fan
    Material used
    3mm Pine Plywood
    acrylic
    This project can be cut on plywood sheeting ranging from 3 - 6 mm depending on need. Later tests also showed good results with acrylic so long as it was cut slowly using multiple passes to prevent melting of the loom picks.
    Difficulty Level
    Beginner
    Total time
    22 min

    License

    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts
    ×