Report
Christmas Paper Lantern
InstructionChristmasPaperLantern
.xcs
Application scenario
Blade cut (40min)
Machine & module
xTool M1 Ultra
20WMaterial used
A4 white cardboard
85
1063
Information
Make a beautiful and atmospheric Christmas paper-cut lamp by yourself. At night, when the small night lamp lights up, you will get a very warm and multi-layered paper-cut lamp.
Instruction
1
Step1: Import the XCS file
Preview
Preview
Preview
Turn on the machine, open xTool Creative Space on the computer, drag in the required xcs files, put them in order in sequence, select the mode of combined processing, set up the mode processing of inkjet and laser respectively. Confirm the parameters and do the preparation work before processing.
2
Step2: Cut
Preview
Preview
Preview
After the knife cutting process is completed, peel off the unwanted part. If the paper is not cut through, keep it in place and do not peel it off. Perform the knife cutting mode again. (Remember to ignore the part you do not need to process)
3
Step3: Base assembly
Preview
Preview
Fold and stick to the cut base first. If you don’t like the crease on the base, you can cut another edge and stick it on to cover it.
4
Step4: Internal assembly
Preview
Preview
Preview
9 More images
First, arrange all the cut parts.
a. Assemble the Christmas tree and insert the Christmas tree abc into the base in sequence;
b. Insert the paper sculpture of the house into the first circle of the base at the angle you like;
c. Paste the paper sculpture of the person first, and then insert it into the second circle of the card slot in sequence at the angle you like;
d. Paste the paper sculpture of the fence first, and then insert it into the third circle of the card slot in sequence according to the order marked on the base (from 1 to 6);
e. Finally, put on the lampshade and add a little decoration, and a warm, layered, and scene-rich Christmas paper sculpture lamp is complete!
Comments
Remixes
xTool Supplies Used in This Template