Holzkäpsele
Report

christmas scene relief

Instruction
christmas_scene_relief.xcs
christmas_scene_relief
.xcs
Application scenario
Laser processing (200min)
Machine & module
xTool M1
10W
Material used
5mm birch plywood
1388
7462
Information
      I tried to make some christmas scene with the AImake tool and the relief came out pretty nice!
    
AImake Info
atomm-ai-image
Style: Low relief
[Prompt] christmas scene, Josef and Maria with newborn, shepherds coming to the stable with sheep
Instruction
1
Step1: Generate a picture with AImake
Preview

It often takes a lot of time to find free pictures that are actually good in quality especially, if you wanna use them for engraving a relief.
The DesignFind website provides a perfect tool for this: AImake. As you can see, you only need 6 points for 1 generated picture (12 for 2) and everyone starts with 200 free points. Try the following prompt to generate your own christmas scene:

[Style] Low relief
[Prompt] christmas scene, Josef and Maria with newborn, shepherds coming to the stable with sheep

2
Step2: Preparing in XTool Creative Space
Preview
Preview

After you downloaded a .png file from AImake you can open this directly in XTool Creative Space. Now there are only a few things to prepare:
 

  1. Adjust the size of the relief to the size of your wooden piece or make your own cutout and put the picture in the center
  2. Copy the picture and change the greyscale of the second one (see image 1)
  3. Align the two pictures horizontally and vertically
3
Step3: Engraving
Preview

With the two layers from step 2 you will get a deeper relief! Now you can engrave your wooden piece with the settings above. This will take some time (depending on the size you chose) but the result is totally worth it!

Enjoy the christmas scene!

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1