download a vector from the internet

I added a vector of 3.5

create a rectangle to then join with my vector

Create another rectangle for the center piece and 4 smaller rectangles for what the pieces will fit together.

position my rectangles on the base and select join

Lastly we will duplicate our side piece

Before engraving you can paint your piece of wood with acrylic spray paint or whatever you have, I preferred to leave it raw

we record with the air assistant on

To cut we used the air assistant and this time the wood was cut in 2 passes,although I generally use 3 passes to avoid errors

To assemble I just joined the pieces, if it is a little loose with a little bit of tacky glue it is completely fixed