3D Christmas Bulb Backer and Frame, 3 and 3.5", Step-by-Step Instructions!

Trace920 avatar
Trace920
·
24
177
Design Files (1)
  • 3-DRoundOrnamentTemplate,3and3.5InchRound.xcs
    S1
    • Edited 2025/02/14

    Summary

    One of my challenges with creating 3-D Christmas Ornaments was creating the backer and frame. I thought I would take some of the work out of it to allow folks to get right down to adding elements, cutting the file, and then painting and assembling. This project was created in XCS, using the snowman found in the Shapes, Festival selection window.

I also included a ready to go snowman ornament for reference. Enjoy!

    Production Info

    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    20W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool D1
    5W, 10W, 20W
    xTool S1
    10W, 40W
    xTool F1
    10W
    xTool M1 Ultra
    10W, 20W
    xTool F1 Ultra
    20W
    xTool P2S
    55W
    xTool P2
    55W
    xTool M1
    5W, 10W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    Material used
    3mm Basswood Plywood
    Acrylic Paints
    Starbond Thick
    3mm Basswood for the ornaments. Acrylic paint for that personal touch. Starbond Thick, or another glue of your choice to make it all stick together.
    Difficulty Level
    Intermediate
    Total time
    20 min

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts