F1 jig for 100mm round coasters
roy.isserlis
·
10
181
Design Files (1)
  • F1jigfor100mmslatecoasters.xcs
    P2
    • Description
    A simple two part jig that holds 100mm slate coasters so the piece's height in the F1 is the same up or down as the rubber feet should fit in the gaps in the lower plate. No glue needed as both plates fit in F1 baseplate space.

Cut out of 3mm colour acrylic on a P2 (not black as the F1 can damage that)
    Production Info
    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool P2
    55W
    Material used
    3mm Brown Opaque Glossy Acrylic
    change the type of acrylic in XCS to match the material you will be using
    Difficulty Level
    Beginner
    Total time
    6 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    License
    CC BY
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format, so long as attribution is given to the creator. The license allows for commercial use.
    Do you like this project?