Description
This picture was taken from a print. The first image is lasered onto a mirror. It was lasered with the mirrored side up. Second image shows the back side of the mirror. If you go mirror side down make sure to reverse the image. The pebbled background you see in the first image is the ceiling unfortunately. 2nd print is done on 3mm basswood sheet with the same settings.
Production Info
Instruction
Not included
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module
xTool D1 Pro
40W
Material used
Glass mirror
3mm Basswood Plywood
10" x 10" mirror, 8" x 12" Basswood
Total time
30 min
Also compatible with other machines. Visit the Material EasySet Library for more.
Setting