The red layer in the design is the front section of the stand that can be personalised. This piece should be made from 1.6mm material but if you don't have this available you can easily adjust the design to make other thicknesses of material work.

To do this all you need to do is select the thin rectangular slots in the side panels and adjust the size to fit your chosen material.

These are the setting for cutting the main parts from 3mm wood using the xTool D1 Pro 5w laser.

If you are using a different material you can ignore this step.

All parts of this stand should easily slot together although I would recommend also using some glue to add extra strength.