Cross Art with LED lighting.
James Pelt
·
42
1132
Design Files (1)
  • Cross Art.zip
    • Description
    The end result is a cross with one of several decorative faces cut from thin semi-transparent acrylic sheets, which is lit from the inside and powered by a "wall-wart" transformer.
This will be an advanced project in that it involves using LED strip lights to light the project from the inside out. There will be some electronic soldering involved. I will guide you along the way, but if you are not comfortable with soldering, please seek the assistance of someone who is.
    Production Info
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool D1 Pro
    Material used
    Small wood screws
    3mm Walnut Plywood
    Transparent Acrylic
    3mm MDF Board
    2 sheets 3mm Walnut Plywood for face and frame. A4 1 sheet 1/8 MDF for back. 12x12 or A4 1 sheet PATTERNPLY® PASTEL STAINED GLASS on CLEAR FLEX available from Smoky Hill Designs 4 small brass wood screws #2 by 3/8" 12 inches of white LED lighting strip (NOT ws2811 or ws2812b) available from Amazon.
    Total time
    240 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.
    Do you like this project?