HomeTemplatesDecorHome DecorWall Art
mtstate.jh
Report
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool D1 Pro machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

the last supper

Instruction
last supper 1.jpg
last supper 1
.jpg
Application scenario
Laser (1min)
Machine & module
xTool D1 Pro
10W
Material used
3mm Cherrywood Plywood
3mm Basswood Plywood
3000
26545
Information
      this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look
Instruction
1
Step1

this is the last supper on a 3/4 in cherry board that i sanded the sides with a angle grinder on a 45degree angle then i burned the edges with a torch and lightly sanded then put 2 coats of poly on it . this is a nice way to finish a unframed picture and gives a rustic look 

Comments
Remixes
xTool Supplies Used in This Template
xTool D1 Pro
xTool D1 Pro
3mm Cherrywood Plywood
3mm Cherrywood Plywood
3mm Basswood Plywood
3mm Basswood Plywood