Report
Halloween Ghost
InstructionHalloweenGhost
.xcs
Show 1 more
Application scenario
Laser processing (30min)
Machine & module
xTool S1
20WCompatibles · 9
Material used
3mm Basswood Plywood
105
921
Information
Bring a ghostly presence to your Halloween decorations with this spooky ghost figure. Its simple yet eerie single-layer design will send shivers down your spine. Ideal for laser cutting from wood, plywood, MDF, acrylic, paper, or cardboard, this ghost is perfect for hanging or placing anywhere you need a spooky vibe.
Key Features:
1-layer design: Ensures maximum detail and accuracy.
Versatile materials: Cut from a wide range of materials, including wood, MDF, acrylic, paper, and cardboard.
Easy to assemble: Detailed instructions are below.
Scalable to your desired size.
Perfect for both beginners and experienced makers.
Download this design and start creating your own enchanted Halloween Sign!
Instruction
1
Step1: Using xTool Creative Space
Preview
Switch on the machine, open xTool Creative Space on your computer, drag in the required XCS file, 300*600*3mm Plywood board into the machine, refresh the page, click on ranging, adjust the parameters, and get ready for cutting. When using the S1 machine, you need to turn on the air pump to prevent the board from yellowing and discoloring during laser cutting.
BLACK LAYER
- Make sure you opened "Layer and Object List” by clicking on the Icon on the bottom left of the screen.
- Select the black layer (this layer contains the path for cutting).
- Set the processing type of the black layer to Cut.
- Click on “EasySet panel” to open the power and speed settings for the selected layer.
- Set the Power (S1-20w: 100)
- Set Speed (S1-20w: 5)
- Set Number of Passes (S1-20w: 1)
2
Step2: After cutting
Preview
Preview
After cutting you have one element.
You can paint it.
3
Step3: Done
Preview
Now you can elevate your Halloween celebrations with this beautifully designed Halloween Sign!
Comments
Remixes
xTool Supplies Used in This Template