Acrylic Happy Halloween Witch

Swampy avatar
Swampy
·
27
246
Design Files (1)
  • WitchHalloweenAcrylic.xcs
    S1
    • Edited 2025/04/09

    Summary

    A quick Halloween project using black acrylic that only takes about 19 minutes with the S1 40W.  Includes a stand and uses the witch image from xTool's Artimind built into XCS.

** Please note:  Be sure to adjust the cutout on the stand depending on the thickness of your acrylic.  Mine was exactly 3mm thick which is why the height on the insert cutout on the stand is set to 2.6mm and still allows the witch part to slightly lean back for better viewing.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser processing
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Material used
    3mm Black Acrylic
    Difficulty Level
    Beginner
    Total time
    19 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    Setting

    Setting 1 Process on baseplate - Bitmap Laser Engrave - BitmapMode: Grayscale  BitmapScanMode: zMode  Density: 120  Power: 25  Repeat: 1  Speed: 300 
    Setting 2 Process on baseplate - Vector Laser Engrave - BitmapScanMode: zMode  Density: 200  Power: 20  Repeat: 1  Speed: 400 
    Setting 3 Process on baseplate - Laser Cut - BreakPointCount: 2  BreakPointDistance: 100  BreakPointMode: count  BreakPointPower: 0  BreakPointSize: 0.5  CuttingDrop: false  CuttingDropValue: 3  EnableBreakPoint: false  EnableKerf: false  KerfDistance: 0  Power: 100  Repeat: 1  Speed: 7 

    License

    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.
    This work contains AI-generated content.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts