[Week 1 Task] MAKE A BOAT THAT ACTUALLY MOVES IN THE WATER

Allen the maker avatar
Allen the maker
·
116
1240
Design Files (1)
  • paddle boat.svg

    • Summary

    This is for an easy entry level design that is is very rewarding because it will move through the water with its paddle propeller. Just cut the boat and the propeller, slide the propeller together, put a rubber band on the boat, spin the propeller backwards as much as you can then drop it in the water to let 'er rip!

    Production Info

    Application scenario
    Laser
    Software
    Lightburn
    Machine & processing module
    xTool D1
    10W
    Material used
    3mm Basswood Plywood
    6mm or .25" basswood is used for the boat and 3mm or .125" is used for the propeller.
    Total time
    10 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    Do you like this project?