Stained-Glass style acrylic suncatcher

BestCaseSurvival avatar
BestCaseSurvival
·
48
532
Design Files (1)
  • StarTrekDeltaStainedGlass.xcs
    P2
    • Edited 2025/02/27

    Summary

    Created as a stress-test for friction-fitting after adjusting for the laser kerf.

    Production Info

    Application scenario
    Laser processing
    Software
    xTool Creative Space、inkscape
    Machine & processing module
    xTool P2
    55W
    Compatible xTool Machine
    Guidelines for using compatible machines
    xTool P2
    xTool P2S
    55W
    xTool F1
    10W
    xTool S1
    10W, 20W, 40W
    xTool D1 Pro
    5W, 20W, 10W, 40W
    xTool M1
    5W, 10W
    xTool F1 Ultra
    20W
    xTool D1
    5W, 10W, 20W
    xTool M1 Ultra
    10W, 20W
    Material used
    3mm Blue Translucent Acrylic
    3mm Iridescent Transparent Blue Film Water Ripple Acrylic
    3mm Iridescent Transparent Blue Film Striped Acrylic
    assorted 3mm acrylics
    3mm Basswood Plywood
    Cut from 3mm acrylics, with the frame as basswood spray-painted black. Some small amount of plastic weld was used as some pieces did not perfectly friction-fit into the frame.
    Difficulty Level
    Intermediate
    Total time
    90 min

    License

    CC BY-NC-SA
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts