Description
I needed a quick way to accurately place in acrylic blanks to batch nightlights. I mean, who wouldn't? I made two versions, one for dark acrylic that includes a bottom, and another for light or clear acrylic that allows you to use black cardstock or the like to allow engraving with a diode laser.
Production Info
Application scenario
Laser
Software
xTool Creative Space
Machine & processing module
xTool S1
20W
Material used
3mm Basswood Plywood
I used a 12x12 3mm Basswood from VKIZA, purchased from Amazon. I also used a little bit of Titebond II to secure the jig to another 12x12 to provide a backing. You could use CA glue, but given the size I chose wood glue.
Total time
15 min
Also compatible with other machines. Visit the Material EasySet Library for more.
License
This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator. If you remix, adapt, or build upon the material, you must license the modified material under identical terms.