HomeTemplatesDecorHome DecorWall Art
Herb THE berT
Report
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Project made with xTool M1 machine for Laser cut and engrave.
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave
Laser cut and engrave

Mulilayer LED Frame

Color Art Contest
Instruction
Multilayer LED Frame.xcs
Multilayer LED Frame
.xcs
Application scenario
Laser processing (120min)
Machine & module
xTool M1
10W
Compatibles · 9
Material used
3mm Basswood Plywood
134
1956
Information
      You can easily buy everything at a Swedish furniture store :)

We call the picture frame VÄSTANHED
We call the LED light strip VATTENSTEN

For the rest, all you need is your laser

The practical thing here is that you can take A4-sized 3mm thick wood and use up almost all of it
Framesize is: 20x25

if you want to rebuild it, there are step by step instructions in XCS at the bottom of the How to 
easy peasy :)
Instruction
1
Step1: Laser
Preview

Laser everything together
the spacers are in one layer so that you have less wood loss 

The practical thing here is that you can take A4-sized wood and use up almost all of it

2
Step2: everything at hand
Preview

Everything ready

  1. Deep picture frame 20x25
  2. Layers 3mm
  3. LED light
  4. Spacer
     
3
Step3: Painting
Preview
Preview
  1. I made the layers in green
  2. the couple in gold
  3. the backplate black little dots with white & gold for the stars
4
Step4: 1st layer
Preview
Preview
  1. place the layer in the frame
  2. glue a spacer in each corner
5
Step5: 2nd layer
Preview
  • place the 2nd layer on the led strip 
  • lay the led strip all around -
    make sure that the beginning is at the bottom left because there is an opening at the 3rd layer
  • the strip here has an adhesive strip on the back otherwise with a double-sided adhesive tape

 


 

6
Step6: 3rd layer & backplate
Preview
Preview
  1. insert the spacers again put the 3rd layer on top
  2. put another spacer in and then the backplate on top

here is another example of what the frame would look like in black

7
Step7: Step by Step Selfcreating in XCS 1v3
Preview
Preview
  • measure the inner width of the picture frame
  • create a rectangle in this size
  • create a 1cm smaller rectangle
  • connect both to a compound vector
8
Step8: Step by Step Selfcreating in XCS 2v3
Preview
Preview
Preview
  • Add a tree to the workspace 
    here I took the upper part of a tree as a bush
  • Remove the remaining part with a rectangle
  • Connect the bush and the tree
  • Place the tree in the frame
  • Remove the overhang with a rectangle
  • Connect the trees to the frame
9
Step9: Step by Step Selfcreating in XCS 3v3
Preview

for the couple i use the AI

i use the prompt 
"Silhouette of Couple Walking Hand in Hand"

load this in XCS in choose trace image

remove all other lines and vectors

Comments
Remixes
xTool Supplies Used in This Template
xTool M1
xTool M1
3mm Basswood Plywood
3mm Basswood Plywood

License

CC BY-NC-SA