Xtool S1 Toolrack with magnetic mount option

vverbon avatar
vverbon
·
29
294
Design Files (1)
  • ToolHolder Xtool S1.xcs
    S1
    • Edited 2025/04/29

    Summary

    With the S1 and it's various options, you get various tools for both the Xtool S1 and the rotary accessory. I constantly find myself looking for the tools. I fixed this by designing this toolrack. On the back I made two plates with two holes each (deep-engraved to 2mm) to place tiny round magnets with diameter 5mm (available on other cheap sites) in them. This way you can just fix the toolrack to the side of the xtool.

    Production Info

    Instruction
    Not included
    Application scenario
    Laser
    Software
    xTool Creative Space
    Machine & processing module
    xTool S1
    40W
    Material used
    3mm Pine Plywood
    So this is basically made with 3.6mm plywood (in .NL it's called: multiplex). Connections fit snugly, but I always glue them to make sure.
    Total time
    25 min
    Also compatible with other machines. Visit the Material EasySet Library  for more.

    Setting

    Setting 1
    Setting 2
    Setting 3
    Setting 4
    Setting 5

    License

    CC BY-NC
    This license allows reusers to distribute, remix, adapt, and build upon the material in any medium or format for noncommercial purposes only, and only so long as attribution is given to the creator.

    Do you like this project?

    You may also like

    gift
    Newcomer gifts