Turn on the machine and install the laser module,connect machine,Put the 3mm walnut plywood into the machine.
Check the parameters, and prepare to cut. (Before starting to cut and carve the board, we can paste a layer of paper on the surface of the board to prevent the laser cutting carbonized dust from sticking to the surface of the board)
According to the order on the picture
Take out the laser-cut parts and glue them together
According to the order in the picture, distinguish the three sizes of inserts: large, medium and small. According to the diagram sequence, then insert the inserts into the main body , and then use glue to bond the parts together. (6 pieces for large size, 12 pieces for medium size, 12 pieces for small size)
Large-Small-Medium-Small-Medium
Assembling the light.
That's it!